LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Mirai XLE >> Repair and Diagnosis >> Electrical >> Gauges >> Meter / Gauge System - Diagnostic Codes (3 Of 3) & Symptom Tests >> Meter / Gauge System >> FC System Indicator Malfunction [11/2020 - 12/2023] >> Procedure

FC System Indicator Malfunction [11/2020 - 12/2023]: Procedure

  1. CHECK FOR DTC (HYBRID CONTROL SYSTEM) 
    1. Check for DTCs.

      Powertrain > EV > Trouble Codes 

      OK

      No DTCs are output.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    GO TO HYBRID CONTROL SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2020 - ] 

    Result: 

    OK 

    See step  2

  2. READ VALUE USING GTS (HV/EV SYSTEM INDICATOR) 
    1. Using the GTS, read the Data List.

      Refer to DATA LIST / ACTIVE TEST [11/2020 - 12/2023]

      Body Electrical > Combination Meter > Data List 

      Tester Display Measurement Item Normal Condition Reference Value Diagnostic Note
      HV/EV System Indicator FC system indicator value Min.: -101%, Max.: 511% or Unset Current FC system indicator value "Unset" is displayed when the vehicle is stopped and the ignition switch is on (READY).

      Body Electrical > Combination Meter > Data List 

      Tester Display
      HV/EV System Indicator

      OK

      FC system indicator value displayed on the GTS is almost the same as HV/EV system indicator indication.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    GO TO HYBRID CONTROL SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2020 - ] 

    Result: 

    OK 

    See step  3

  3. CHECK COMBINATION METER ASSEMBLY 
    1. Replace the combination meter assembly.

      Refer to REMOVAL [11/2020 - 11/2021] , or refer to REMOVAL [11/2021 - 12/2022] , or refer to REMOVAL [12/2022 - 12/2023]

    2. Check that the operation of the FC system indicator returns to normal.

      OK

      The operation of the FC system indicator returns to normal.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    END (COMBINATION METER ASSEMBLY IS DEFECTIVE) 

    Result: 

    NG 

    REPLACE EV CONTROL ECU. Refer to  REMOVAL [11/2020 - 11/2021]  , or refer to  REMOVAL [11/2021 - 12/2022]  , or refer to  REMOVAL [12/2022 - 12/2023]