LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Mirai XLE >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Axle And Differential - Service Information (1 Of 2) >> Steering Knuckle >> Removal [12/2023 - ] >> Procedure

Removal [12/2023 - ]: Procedure

  1. REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH 

    Refer to REMOVAL [12/2023 - ] 

  2. REMOVE FRONT FLEXIBLE HOSE BRACKET LH 
    1. GTY979319Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. DISCONNECT TIE ROD ASSEMBLY LH 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 Refer to PROCEDURE - Step 10
  4. LOOSEN STEERING KNUCKLE LH 
    1. GTY979851Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. DISCONNECT FRONT UPPER NO. 1 SUSPENSION ARM ASSEMBLY LH 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 Refer to PROCEDURE - Step 5
  6. DISCONNECT FRONT UPPER NO. 2 SUSPENSION ARM ASSEMBLY LH 
    1. Perform the same procedure as for the front upper No. 1 suspension arm assembly LH.
  7. REMOVE STEERING KNUCKLE LH 
    1. GTY979851Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals