Inspection [11/2020 - ]: Procedure
- INSPECT LUGGAGE ELECTRICAL KEY SWITCH
- Check the operation of the luggage electrical key switch.
*a Component without harness connected
(Luggage Electrical Key Switch)- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Switch Condition Specified Condition Result K9-3(UL) - K9-2(E) Fuel lid opener switch pushed (ON) Below 1 Ω Ω K9-3(UL) - K9-2(E) Fuel lid opener switch not pushed (OFF) 10 kΩ or higher kΩ HINT:
If the result is not as specified, replace the luggage electrical key switch.
- Measure the resistance according to the value(s) in the table below.
- Check the operation of the luggage electrical key switch.