LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Mirai XLE >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door / Hatch - Service Information (3 Of 3) >> Luggage Compartment Door >> Reassembly [12/2023 - ] >> Procedure

Reassembly [12/2023 - ]: Procedure

  1. INSTALL LUGGAGE COMPARTMENT DOOR CUSHION 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 HINT: 
    Use the same procedure for the opposite side.
    1. GTY1016604Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Engage the claws and install the luggage compartment door cushion.
  2. INSTALL LUGGAGE COMPARTMENT DOOR HINGE ASSEMBLY LH 

    HINT: 

    Use the same procedure for both the RH and LH sides.

  3. INSTALL LUGGAGE COMPARTMENT DOOR HINGE ASSEMBLY RH 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    NOTE:

    Do not perform work if the trunk panel (luggage compartment door) is not securely supported.
    1. GTY1162461Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Bolt (A) *2 Bolt (B)
      1. Install the 2 luggage door hinge bolts, 2 bolts and luggage compartment door hinge assembly RH.

        Bolt (A) 

        Torque: 13 N.m (133 kgf/cm, 10 ft.lbf) 

        Bolt (B) 

        Torque: 19.5 N.m (199 kgf/cm, 14 ft.lbf) 

  4. INSTALL LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY 

    HINT: 

    Use the same procedure for both the RH and LH sides.

  5. INSTALL LUGGAGE ELECTRICAL KEY SWITCH 

    See step  1

  6. INSTALL TELEVISION AND INNER REAR VIEW MIRROR CAMERA ASSEMBLY (w/ Digital Inner Mirror) 

    Refer to PROCEDURE - Step 6

  7. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/o Digital Inner Mirror) 

    Refer to PROCEDURE - Step 7

  8. INSTALL LICENSE PLATE LIGHT ASSEMBLY 

    Refer to PROCEDURE - Step 1

  9. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  10. INSTALL REAR LIGHT ASSEMBLY LH 

    Refer to PROCEDURE - Step 1

  11. INSTALL REAR LIGHT ASSEMBLY RH 

    HINT: 

    Use the same procedure for both the RH and LH sides.

  12. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY 
  13. INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY 
  14. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY 

    Torque: 5.5 N.m (56 kgf/cm, 49 in.lbf) 

  15. INSTALL LUGGAGE DOOR CLOSER ASSEMBLY (w/ Easy Closer) 

    Refer to PROCEDURE - Step 2

  16. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (w/o Easy Closer) 

    Refer to PROCEDURE - Step 1

  17. INSTALL LUGGAGE COMPARTMENT DOOR COVER 
  18. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP 
  19. INSPECT EASY CLOSER (w/ Easy Closer) 

    Refer to OPERATION CHECK [11/2020 - ]

  20. CHECK DOOR LOCK OPERATION 
    1. w/ Front LiDAR Sensor

      Refer to OPERATION CHECK [12/2023 - ]

    2. w/o Front LiDAR Sensor

      Refer to OPERATION CHECK [12/2023 - ]

scientia non olet · About LEMON Manuals