LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Mirai XLE >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door / Hatch - Service Information (3 Of 3) >> Luggage Compartment Door Opener Main Switch >> Inspection [11/2020 - ] >> Procedure

Inspection [11/2020 - ]: Procedure

  1. INSPECT LUGGAGE DOOR OPENING CANCEL SWITCH ASSEMBLY 
    1. Check the resistance.
      GTY1005331Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Luggage Door Opening Cancel Switch Assembly)
      *b Cancel Switch
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition Result
        D87-1 - D87-2 Switch off (Not pressed) 10 kΩ or higher kΩ
        D87-1 - D87-2 Switch on (Pressed) Below 1 Ω Ω
        1. If the result is not as specified, replace the luggage door opening cancel switch assembly.
scientia non olet · About LEMON Manuals