LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Mirai XLE >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door / Hatch - Service Information (3 Of 3) >> Luggage Compartment Door Opener Inner Switch >> Inspection [11/2020 - ] >> Procedure

Inspection [11/2020 - ]: Procedure

  1. INSPECT LUGGAGE DOOR OPENING SWITCH ASSEMBLY 
    1. Check the switch.
      GTY983096Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Luggage Door Opening Switch)
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition Result
        D110-5(B) - D110-2(L) Pressed (On) Below 1 Ω Ω
        D110-5(B) - D110-2(L) Not pressed (Off) 10 kΩ or higher kΩ

        If the result is not as specified, replace the luggage door opening switch

scientia non olet · About LEMON Manuals