LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Mirai XLE >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge System - Diagnostics - Introduction >> Meter / Gauge System >> Customize Parameters [12/2023 - ] >> Customize Parameters [12/2023 - ]

Customize Parameters [12/2023 - ]

  1. CUSTOMIZE METER / GAUGE SYSTEM 
    1. Customizing with the GTS.
      1. Select the setting by referring to the table below.
        NOTE:

        Be sure to record the current value before customizing.

        Warning 

        Tester Display Description Default Setting ECU
        Flasher Sound Volume Adjust Function to change the flasher sound volume Medium $02:Large,$00:Medium,$01:Small Combination meter assembly
        Reverse Buzzer Setting Function to change the reverse buzzer setting Mute $00:Mute,$01:Continual Combination meter assembly

        Display 

        Tester Display Description Default Setting ECU
        ODO Display Time After IG OFF Adjust Function to change the ODO display time after the ignition switch is turned off 30s $00:30s,$01:60s,$02:600s,$03:OFF Combination meter assembly
        Projection Adjustment (Keystone) Headup display image calibration
        (Keystone calibration)        		 Default $03:Narrow Top (+3),$02:Narrow Top (+2),$01:Narrow Top (+1),$00:Default,$FF:Narrow Bottom (-1),$FE:Narrow Bottom (-2),$FD:Narrow Bottom (-3) Combination meter assembly
        Projection Adjustment (Distortion) Headup display image calibration
        (Keystone calibration)        		 Default $03:Convex (+3),$02:Convex (+2),$01:Convex (+1),$00:Default,$FF:Concave (-1),$FE:Concave (-2),$FD:Concave (-3) Combination meter assembly
        Audio Information Display Function Headup display (audio information display) setting ON $00:OFF,$01:ON Combination meter assembly
        Memory Call Link Function Headup display (memory call-linked) setting ON $00:OFF,$01:ON Combination meter assembly
    2. Customizing with the multi-information display
      1. Select the settings tab on the multi-information display and set the customize settings. (w/ Front LiDAR Sensor)
        Display Description Default Setting ECU
        Language Function to change the language on the display English
        • English
        • French
        • Spanish
        		 Combination meter assembly
        Units Function to change the units on the display
        • miles (MPGe)*1
        • km(kg/100 km)*2
        • km (km/kg)
        • km(kg/100 km)
        • miles(MPGe)
        		 Combination meter assembly
        Eco-friendly driving information tab FC system indicator eco acceleration guidance display setting ON ON/OFF Combination meter assembly
        Displayed fuel economy display item setting Total Average Trip Average/Total Average/Tank Average Combination meter assembly
        Audio tab Function to change the audio tab on the display ON ON/OFF Combination meter assembly
        Vehicle information tab Function to change the energy monitor on the display ON ON/OFF Combination meter assembly
        Function to change the drive info. type on the display Trip Trip/Total Combination meter assembly
        Function to change the drive info. items on the display
        • Distance (The upper section)
        • Total Time (The lower berth)
        		 Average Speed/Distance/Total Time Combination meter assembly
        Trip Summary Function to change the trip summary on the display Drive Info Drive Info/Eco Score Combination meter assembly
        Pop-Up Display Function to change the TbT navigation on the display ON ON/OFF Combination meter assembly
        Function to change the telephone on the display ON ON/OFF Combination meter assembly
        Function to change the audio operation on the display ON ON/OFF Combination meter assembly
        Function to change the volume operation on the display ON ON/OFF Combination meter assembly
        Function to change the voice control on the display ON ON/OFF Combination meter assembly
        Function to change the brightness on the display ON ON/OFF Combination meter assembly
        Function to change the V2V advisory on the display OFF ON/OFF Combination meter assembly
        Multi-information display OFF Function to change the Multi-information display off setting on the display - - Combination meter assembly
        Default Settings Reset the combination meter settings to the default setting - YES or NO Combination meter assembly

        *1: w/ DRL OFF Switch

        *2: w/o DRL OFF Switch

      2. Select the settings tab on the multi-information display and set the customize settings. (w/o Front LiDAR Sensor)
        HUD MAIN

        Display Description Default Setting ECU
        Functions Headup display ON/OFF setting ON ON or OFF Combination meter assembly
        HUD Brightness / Position Display brightness / position setting for headup display. - - Combination meter assembly
        HUD Driving Support Headup display content settings Simple
        • Full
        • Simple
        • Minimum
        		 Combination meter assembly
        HUD Rotation Headup display image calibration (rotation calibration) - - Combination meter assembly
        METER SETTINGS

        Display Description Default Setting ECU
        Language Function to change the language on the display English English*1 Combination meter assembly
        Units Function to change the units on the display
        • miles (MPGe)*2
        • km(kg/100 km)*3
        • km(kg/100 km)
        • miles(kg/100 km)
        		 Combination meter assembly
        Meter Type Meter indication layout setting Type 3
        • Type 1
        • Type 2
        • Type 3
        		 Combination meter assembly
        Meter Style Function to change the meter style on the display Smart
        • Casual
        • Smart
        • Tough
        • Sporty
        		 Combination meter assembly
        Dial Type Function to change the dial type on the display FCV system indicator
        • Speedometer
        • FCV system indicator
        		 Combination meter assembly
        Fuel Economy Fuel economy setting -
        • Trip Average
        • Total Average
        		 Combination meter assembly
        FC System FC system indicator setting ON Eco Guidance ON/OFF Combination meter assembly
        Drive Info Items Function to change the item to be displayed on Drive Info Items Upper: Trip Distance
        Lower: Trip Time
        • Trip Average Speed
        • Trip Distance
        • Trip Time
        		 Combination meter assembly
        TRIP A Items Function to change the item to be displayed on trip A item Upper: Distance
        Lower: Total Time
        • Average Speed
        • Distance
        • Total Time
        		 Combination meter assembly
        TRIP B Items Function to change the item to be displayed on trip B item Upper: Distance
        Lower: Total Time
        • Average Speed
        • Distance
        • Total Time
        		 Combination meter assembly
        Pop-Up Display Function to change the TbT navigation on the display ON ON/OFF Combination meter assembly
        Function to change the telephone on the display ON ON/OFF Combination meter assembly
        Function to change the audio operation on the display ON ON/OFF Combination meter assembly
        Function to change the volume operation on the display ON ON/OFF Combination meter assembly
        Function to change the voice control on the display ON ON/OFF Combination meter assembly
        Function to change the brightness on the display ON ON/OFF Combination meter assembly
        Default Settings Reset the combination meter settings to the default setting - YES or NO Combination meter assembly

        *1: Available languages may differ depending on the target region.

        *2: w/ DRL OFF Switch

        *3: w/o DRL OFF Switch

scientia non olet · About LEMON Manuals