DTC U0073: Control Module Communication Bus Off; DTC U0101: Lost Communication with TCM; DTC U0126: Lost Communication with Steering Angle Sensor Module; DTC U0129: Lost Communication with Brake System Control Module; DTC U0142: Lost Communication with Body Control Module "B"; DTC U0155: Lost Communication with Instrument Panel Cluster (IPC) Control Module; DTC U0242: Lost Communication With Headlamp Control Module "B"; DTC U0293: Lost Communication with Hybrid Vehicle Control System [11/2020 - 11/2021]: Procedure

1. Clear the DTCs.

   for Mono Camera Type:

   Body Electrical > HL AutoLeveling > Clear DTCs 

   for Stereo Camera Type:

   Body Electrical > AFS > Clear DTCs 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Check for DTCs.

   for Mono Camera Type:

   Body Electrical > HL AutoLeveling > Trouble Codes 

   for Stereo Camera Type:

   Body Electrical > AFS > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output	A
   DTCs are output	B

Result: 

A 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2020 - ] 

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2020 - 11/2021]