LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Mirai XLE >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (W/ Headlight Ecu) - Diagnostic Codes (1 Of 2) >> LIGHTING SYSTEM (w/ Headlight ECU) >> DTC B2456: Left Headlight ECU Variation Error [11/2020 - 11/2021] >> Procedure

DTC B2456: Left Headlight ECU Variation Error [11/2020 - 11/2021]: Procedure

  1. CLEAR DTC 
    1. Clear the DTCs.

      for Mono Camera Type:

      Body Electrical > HL AutoLeveling > Clear DTCs 

      for Stereo Camera Type:

      Body Electrical > AFS > Clear DTCs 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  2

  2. CHECK FOR DTC 
    1. Check for DTCs.

      for Mono Camera Type:

      Body Electrical > HL AutoLeveling > Trouble Codes 

      for Stereo Camera Type:

      Body Electrical > AFS > Trouble Codes 

      Result

      Result Proceed to
      B2456 is not output A
      B2456 is output B

    Result: 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2020 - ] 

    Result: 

    See step  3

  3. CHECK EV CONTROL ECU 
    1. Check if the part number of the EV control ECU installed to the vehicle is correct.

      OK

      Part number is correct.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    REPLACE EV CONTROL ECU. Refer to  INSTALLATION [11/2020 - 12/2022] 

    Result: 

    OK 

    See step  4

  4. CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) 
    1. Check if the part number of the main body ECU (multiplex network body ECU) installed to the vehicle is correct.

      OK

      Part number is correct.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    REPLACE HEADLIGHT ECU SUB-ASSEMBLY LH. Refer to  REMOVAL [11/2020 - 11/2021] 

    Result: 

    NG 

    REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU). Refer to  REMOVAL [11/2020 - 11/2021]