DTC B2417: Headlight Beam Level Control Motor LH; DTC B2418: Headlight Beam Level Control Motor RH [11/2020 - 08/2021]: Procedure

CHECK FOR DTC

Pre-procedure1

Clear the DTCs.
Body Electrical > AFS > Clear DTCs
Turn the ignition switch ON and wait for at least 10 seconds or more.
Procedure1

Check for DTCs.

Body Electrical > AFS > Trouble Codes

Result

	Proceed to
B2417 or B2418 is not output	A
B2417 is output	B
B2418 is output	C

Post-procedure1

None

Result:

A

USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2020 - ]

Result:

B

REPLACE HEADLIGHT UNIT ASSEMBLY LH. Refer to DISASSEMBLY [11/2020 - 11/2021]

Result:

C

REPLACE HEADLIGHT UNIT ASSEMBLY RH. Refer to DISASSEMBLY [11/2020 - 11/2021]