DTC U0073: Sending Malfunction (Navigation to APGS); DTC U0100: Engine/EV ECU Communication; DTC U0129: VSC(ECB)ECU Communication; DTC U0140: Lost Communication with Body Control Module; DTC U0155: Meter ECU Communication; DTC U0164: Air Conditioner ECU Communication; DTC U0198: Lost Communication with Telematic Control Module; DTC U0293: HV ECU Communication; DTC U1135: Lost Communication with Plug-in Control Module [11/2020 - 12/2022]: Procedure

Pre-procedure1

1. Clear the DTCs.

   Body Electrical > Navigation System > Clear DTCs 

   Procedure1

2. Recheck for DTCs and check that no DTCs are output.

   Body Electrical > Navigation System > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output	A
   DTCs are output	B

   Post-procedure1

3. None

Result: 

A 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2020 - ] 

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2020 - 11/2021]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2021 - 12/2022]