LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Mirai Limited >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension System (Rear) - Service Information >> Rear Stabilizer Bar >> Removal [12/2022 - 12/2023] >> Procedure

Removal [12/2022 - 12/2023]: Procedure

  1. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY 

    Refer to REMOVAL [12/2022 - 12/2023]

  2. REMOVE REAR STABILIZER LINK ASSEMBLY LH 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 See step  5
  3. REMOVE REAR STABILIZER LINK ASSEMBLY RH 
    1. Perform the same procedure as for the LH side.
  4. REMOVE REAR STABILIZER BAR 
    1. GTY979589Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE REAR NO. 1 STABILIZER BAR BRACKET LH 
    1. GTY980195Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE REAR NO. 1 STABILIZER BAR BRACKET RH 
    1. Perform the same procedure as for the rear No. 1 stabilizer bar bracket LH.
  7. REMOVE REAR STABILIZER BUSHING 
    1. GTY978859Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals