Caution / Notice / Hint
- After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
Refer to BEFORE DISCONNECTING BATTERY [11/2020 - 11/2021] , or refer to BEFORE DISCONNECTING BATTERY [11/2021 - 12/2022]
- When disconnecting and reconnecting the auxiliary battery
Refer to WORK PROCEDURE [11/2020 - 12/2022]
HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Refer to AUTOMATIC LEARNING CHART [11/2020 - 11/2021] , or refer to AUTOMATIC LEARNING CHART [11/2021 - 12/2023]
- After replacing the airbag ECU assembly, refer to initialization.
Refer to WORK PROCEDURE [11/2020 - 11/2021] , or refer to WORK PROCEDURE [11/2021 - 12/2022]
HINT:
To perform the simulation method, enter check mode (signal check) with the GTS. (Refer to CHECK MODE PROCEDURE [11/2020 - ] ), and then wiggle each connector of the airbag system or drive the vehicle on various types of road. (Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2020 - ] ).