LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Mirai Limited >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System - Diagnostic Codes (4 Of 4), Circuit Tests, Symptom Tests >> Electronically Controlled Brake System >> DTC P0571-00: Brake Switch "A" [11/2020 - 12/2023] >> Description

DTC P0571-00: Brake Switch "A" [11/2020 - 12/2023]: Description

The No. 1 skid control ECU (brake booster with master cylinder assembly) detects the brake operating conditions through a signal transmitted by the stop light switch assembly.

The No. 1 skid control ECU (brake booster with master cylinder assembly) incorporates a circuit to detect an open circuit. This DTC is output when an open circuit is detected in the stop light signal input line.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority Note
P0571-00 Brake Switch "A" An open in the stop light switch circuit continues for 10 seconds or more.
  • Wire harness and connector
  • Stop light switch assembly
  • No. 1 skid control ECU (brake booster with master cylinder assembly)
  • No. 2 semiconductor power integration ECU
  • STP circuit
Brake Booster A Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly)