LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Mirai Limited >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System - Diagnostic Codes (3 Of 4) >> Electronically Controlled Brake System >> DTC C143A-7E: ABS Solenoid Control Actuator Stuck On; DTC C143A-7F: ABS Solenoid Control Actuator Stuck Off [11/2020 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • Inspect the fuses for circuits related to this system before performing the following procedure.
  • After replacing the No. 2 skid control ECU (brake actuator assembly), perform "Calibration".

    Refer to UTILITY [11/2020 - ]

HINT: 

When C137B-A2 and/or C137B-A3 is output together with C143A-7E and/or C143A-7F, inspect and repair the trouble areas indicated by C137B-A2 and/or C137B-A3 first.

For C137B-A2: Refer to DTC C137B-A2: Brake System Control Module "A" System Voltage System Voltage Low [11/2020 - 12/2023] , or refer to DTC C137B-A2: Brake System Control Module "A" System Voltage System Voltage Low [12/2023 - ]

For C137B-A3: Refer to DTC C137B-A3: Brake System Control Module "A" System Voltage System Voltage High [11/2020 - ] 

scientia non olet · About LEMON Manuals