Caution / Notice / Hint

NOTE:

Inspect the fuses for circuits related to this system before performing the following procedure.
After replacing the No. 2 skid control ECU (brake actuator assembly), perform "Calibration".
Refer to UTILITY [11/2020 - ]

HINT:

When DTC P0571-12 and/or P0571-13 are output together with DTC C1380-7F, inspect and repair the trouble areas indicated by DTC P0571-12 and/or P0571-13 first.

For P0571-12: Refer to DTC P0571-12: Brake Switch "A" Circuit Short to Battery [11/2020 - ]

For P0571-13: Refer to DTC P0571-13: Brake Switch "A" Circuit Open [11/2020 - 12/2023]