DTC C05C0-51: Brake Pedal Position Sensor "A" Not Programmed [11/2020 - ]: Description
When the No. 1 skid control ECU (brake booster with master cylinder assembly) judges that the zero point calibration of the brake pedal stroke sensor assembly is incomplete, this DTC is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|
| C05C0-51 | Brake Pedal Position Sensor "A" Not Programmed | The brake pedal stroke sensor assembly zero point calibration is not performed. (Normal brake pedal stroke sensor assembly zero point not memorized.) |
|
Brake Booster | A | Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly) HINT: During Dealer Mode, related DTCs are cleared. |