DTC C0573-2A: Brake Pressure Sensor "C" Signal Stuck In Range [11/2020 - ]: Procedure

Pre-procedure1

• Turn the ignition switch to ON.
• Depress the brake pedal 10 times or more to operate the pump motor.

• After the pump motor stops, check for DTCs.

  Chassis > Brake Booster > Trouble Codes 

  Result

  Result	Proceed to
  C0573-2A is not output	A
  C0573-2A is output	B

Post-procedure1

• None

Result: 

A 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2020 - ] 

Result: 

B 

REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY. Refer to  REMOVAL [11/2020 - 11/2021]  , or refer to  REMOVAL [11/2021 - 12/2022]  , or refer to  REMOVAL [12/2022 - 12/2023]  , or refer to  REMOVAL [12/2023 - ]