Inspection [11/2020 - ]: Procedure
- INSPECT SEATBACK HEATER ASSEMBLY RH
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Seatback Heater Assembly RH)Standard Resistance
Tester Connection Condition Specified Condition Result A-1 - M6-1 Always 20°C (68°F) Below 1 Ω Ω A-2 - M6-2 Always 20°C (68°F) Below 1 Ω Ω A-3 - M6-3 Always 20°C (68°F) Below 1 Ω Ω A-4 - M6-4 Always 20°C (68°F) Below 1 Ω Ω A-5 - M6-5 Always 20°C (68°F) Below 1 Ω Ω A-7 - M6-5 Always 20°C (68°F) 3.25 to 3.97 Ω Ω If the result is not as specified, replace the seatback heater assembly RH.
- Measure the resistance according to the value(s) in the table below.
- INSPECT SEATBACK HEATER ASSEMBLY LH
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Seatback Heater Assembly LH)Standard Resistance
Tester Connection Condition Specified Condition Result A-1 - M1-1 Always 20°C (68°F) Below 1 Ω Ω A-2 - M1-2 Always 20°C (68°F) Below 1 Ω Ω A-3 - M1-3 Always 20°C (68°F) Below 1 Ω Ω A-4 - M1-4 Always 20°C (68°F) Below 1 Ω Ω A-5 - M1-5 Always 20°C (68°F) Below 1 Ω Ω A-7 - M1-5 Always 20°C (68°F) 3.25 to 3.97 Ω Ω If the result is not as specified, replace the seatback heater assembly LH.
- Measure the resistance according to the value(s) in the table below.