LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Mirai Limited >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats - Service Information (3 Of 3) >> Rear Control Switch >> Removal [11/2020 - ] >> Procedure

Removal [11/2020 - ]: Procedure

  1. REMOVE COOLER CONTROL SWITCH ASSEMBLY 
    1. GTY1015897Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
      1. Fold down the armrest and open the cup holder.
      2. Using moulding remover A, detach the claw as shown in the illustration.
      3. Disconnect the connector and remove the cooler control switch assembly.
        NOTE:

        Do not pull while holding the wire harness.

scientia non olet · About LEMON Manuals