LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Mirai Limited >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats - Service Information (3 Of 3) >> Front Seatback Heater >> Inspection [11/2020 - ] >> Procedure

Inspection [11/2020 - ]: Procedure

  1. INSPECT FRONT SEATBACK HEATER ASSEMBLY LH 
    1. Measure the resistance according to the value(s) in the table below.
      GTY1005788Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Front Seatback Heater Assembly LH)

      Standard Resistance

      Tester Connection Condition Specified Condition Result
      1 - 2 Always 20°C (68°F) 3.67 to 4.39 Ω Ω

      If the result is not as specified, replace the front seatback heater assembly LH.

  2. INSPECT FRONT SEATBACK HEATER ASSEMBLY RH 
    1. Measure the resistance according to the value(s) in the table below.
      GTY1005790Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Front Seatback Heater Assembly RH)

      Standard Resistance

      Tester Connection Condition Specified Condition Result
      1 - 2 Always 20°C (68°F) 3.67 to 4.39 Ω Ω

      If the result is not as specified, replace the front seatback heater assembly RH.

scientia non olet · About LEMON Manuals