Caution / Notice / Hint

NOTE:

Inspect the fuses for circuits related to this system before performing the following procedure.
When the sliding roof drive gear sub-assembly is removed and reinstalled or replaced, it requires initialization.
Refer to INITIALIZATION [11/2020 - ]
The roof sunshade system uses the LIN communication system. First, confirm that there are no malfunctions in the LIN communication system. Refer to the How to Proceed with Troubleshooting procedure.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2023 - ]
When a sliding roof drive gear sub-assembly DTC is output, first perform troubleshooting for the sliding roof drive gear sub-assembly DTC.