DTC B2417: Headlight Beam Level Control Motor LH; DTC B2418: Headlight Beam Level Control Motor RH [08/2021 - 12/2023]: Procedure
- CHECK FOR DTC
Pre-procedure1
- Clear the DTCs.
Body Electrical > AFS > Clear DTCs
- Turn the ignition switch ON and wait for at least 10 seconds or more.
- Check for DTCs.
Body Electrical > AFS > Trouble Codes
Result
Proceed to B2417 or B2418 is not output A B2417 is output B B2418 is output C
Post-procedure1
- None
Result:
A
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2020 - ]
Result:
B
REPLACE HEADLIGHT UNIT ASSEMBLY LH. Refer to DISASSEMBLY [11/2020 - 11/2021] , or refer to DISASSEMBLY [11/2021 - 12/2023]
Result:
C
REPLACE HEADLIGHT UNIT ASSEMBLY RH. Refer to DISASSEMBLY [11/2020 - 11/2021] , or refer to DISASSEMBLY [11/2021 - 12/2023]
- Clear the DTCs.