Removal [08/2015 - ]: Procedure

1. Slide the rain sensor cover as shown in the illustration and detach the 2 guides.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Release the stopper by pulling it down.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   TEXT IN ILLUSTRATION
   
   

   *a	Stopper
   	Unlock
   	Remove

3. Remove the rain sensor with rain sensor cover as shown in the illustration.
4. Detach the 2 claws and remove the rain sensor cover.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disconnect the connector and remove the rain sensor.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT: 

• Rain sensor tape is reusable. Only replace the rain sensor tape if it is damaged or contaminated.
• Check that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue before installing the rain sensor.
• If there is any rain sensor tape residue remaining on the windshield glass, replace the tape.