LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Highlander XSE, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (Exterior Panels / Trim - Service Information (2 Of 2)) >> Quarter Garnish >> Disassembly [09/2021 - ] >> Procedure

Disassembly [09/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Corolla Cross, 2024 Toyota Corolla Cross, 2023 Toyota Corolla Cross, and 2022 Toyota Corolla Cross. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE QUARTER PILLAR PAD 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    NOTE:

    When removing the quarter pillar pad, if the double-sided tape is difficult to remove, heat the quarter pillar cover and quarter pillar pad using a heat light.

    Standard

    Item Temperature
    Quarter Pillar Cover 20 to 30 °C (68 to 86 °F)
    Quarter Pillar Pad
    WARNING:
    • Do not touch the heat light and heated parts.
    • Touching the heat light may result in burns.
    • Touching heated parts for a long time may result in burns.
    GTY583249Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *a Heated Part
    *b Heat Light
    NOTE:

    Do not heat the quarter pillar cover and quarter pillar pad excessively.

    1. GTY1032050Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Double-sided Tape - -