LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Highlander XLE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine Mechanical System (T24A-FTS) - Service Information (1 Of 2)) >> Cylinder Head Gasket >> Removal [10/2022 - 11/2023] >> Procedure

Removal [10/2022 - 11/2023]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY 

    Refer to REMOVAL [10/2022 - 11/2023] 

  2. REMOVE DRIVE SHAFT BEARING BRACKET 

    Refer to PROCEDURE - Step 1

  3. REMOVE FUEL DELIVERY GUARD 

    Refer to PROCEDURE - Step 9

  4. DISCONNECT NO. 1 TURBO WATER HOSE 

    Refer to PROCEDURE - Step 11

  5. DISCONNECT NO. 3 WATER BY-PASS HOSE 

    Refer to PROCEDURE - Step 13

  6. DISCONNECT NO. 4 TURBO WATER HOSE 

    Refer to PROCEDURE - Step 15

  7. DISCONNECT NO. 4 WATER BY-PASS HOSE 

    Refer to PROCEDURE - Step 17

  8. DISCONNECT NO. 5 WATER BY-PASS HOSE 

    Refer to PROCEDURE - Step 18

  9. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE 

    Refer to PROCEDURE - Step 13

  10. REMOVE INTAKE MANIFOLD WITH INTERCOOLER ASSEMBLY 

    Refer to PROCEDURE - Step 20

  11. REMOVE WATER CONTROL VALVE 

    Refer to PROCEDURE - Step 10

  12. REMOVE FRONT WATER BY-PASS JOINT 

    Refer to PROCEDURE - Step 16

  13. REMOVE WATER OUTLET GASKET 

    Refer to PROCEDURE - Step 17

  14. REMOVE NO. 1 TURBO INSULATOR 

    Refer to PROCEDURE - Step 25

  15. REMOVE MANIFOLD STAY 

    Refer to PROCEDURE - Step 24

  16. REMOVE NO. 1 TURBO OIL PIPE 

    Refer to PROCEDURE - Step 25

  17. REMOVE NO. 1 TURBO OIL OUTLET GASKET 

    Refer to PROCEDURE - Step 26

  18. REMOVE TURBOCHARGER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 27

  19. REMOVE NO. 2 WATER BY-PASS PIPE 

    Refer to PROCEDURE - Step 34

  20. REMOVE FUEL DELIVERY PIPE 

    Refer to PROCEDURE - Step 13

  21. REMOVE FUEL DELIVERY SPACER 

    Refer to PROCEDURE - Step 14

  22. REMOVE INJECTOR VIBRATION INSULATOR 

    Refer to PROCEDURE - Step 15

  23. REMOVE NO. 5 ENGINE WIRE 

    Refer to PROCEDURE - Step 16

  24. REMOVE PORT FUEL INJECTOR ASSEMBLY 

    Refer to PROCEDURE - Step 17

  25. REMOVE WIRE HARNESS 

    Refer to PROCEDURE - Step 41

  26. REMOVE WATER INLET HOUSING 

    Refer to PROCEDURE - Step 42

  27. REMOVE NO. 2 MANIFOLD STAY 

    Refer to PROCEDURE - Step 43

  28. REMOVE HEATER WATER HOSE BRACKET 

    Refer to PROCEDURE - Step 48

  29. REMOVE SPARK PLUG 

    Refer to PROCEDURE - Step 4

  30. REMOVE OIL COOLER ASSEMBLY 

    Refer to PROCEDURE - Step 4

  31. REMOVE OIL COOLER GASKET 

    Refer to PROCEDURE - Step 5

  32. REMOVE OIL COOLER PIPE GASKET 

    Refer to PROCEDURE - Step 6

  33. REMOVE CYLINDER HEAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 51

  34. REMOVE CYLINDER HEAD GASKET 
    1. GTY1108932Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  35. INSPECT CYLINDER HEAD SET BOLT 

    Refer to PROCEDURE - Step 21

  36. INSPECT CYLINDER HEAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

scientia non olet · About LEMON Manuals