Typical Enabling Conditions
WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
CASE 1 AND 2
| Monitor runs whenever the following DTCs are not stored | None |
| All of the following conditions are met | - |
| Battery voltage | 8 V or higher |
| Ignition switch | ON |
| Starter | Off |
CASE 3
| Monitor runs whenever the following DTCs are not stored | None |
| All of the following conditions are met | - |
| Battery voltage | 8 V or higher |
| Ignition switch | ON |
| Starter | Off |
| One of the following conditions is met | (a), (b), (c) or (d) |
| (a) Park position switch | On |
| (b) Neutral position switch | On |
| (c) Park/Neutral position switch | On |
| (d) R range position switch | On |