LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Highlander Platinum, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Engine Control System (T24A-FTS) - Diagnostic Codes (07 Of 11)) >> SFI System >> DTC P0630-51: VIN Not Programmed [10/2022 - ] >> Procedure

DTC P0630-51: VIN Not Programmed [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0630-51) 
    1. Read the DTCs.

      Powertrain > Engine > Trouble Codes 

      NOTE:

      If P0630-51 is output, the VIN must be written to the ECM using the GTS. However, all DTCs are cleared automatically by the GTS when the VIN is written. If DTCs other than P0630-51 are output, troubleshoot them first.

      Result

      Result Proceed to
      DTC P0630-51 is output A
      DTC P0630-51 and other DTCs are output B

    Result: 

    GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2022 - 11/2023]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [11/2023 - ] 

    Result: 

    See step  2

  2. WRITE VIN 
    1. Write the VIN.

      Refer to REGISTRATION [10/2022 - ]

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    END