LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Highlander Platinum, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Automatic Transmission System (UA81E / UA81F) - Service Information (2 Of 2)) >> Differential Case >> Disassembly [10/2022 - ] >> Procedure

Disassembly [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (OUTER RACE) 
    1. GTY1113367Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using SST, remove the front differential case rear tapered roller bearing (outer race) from the automatic transaxle case sub-assembly.
        • SST: 09308-36010 
        NOTE:

        Be careful not to damage the automatic transaxle case sub-assembly.

        HINT: 

        Align the claw of SST with the indentation of the automatic transaxle case sub-assembly when removing the parts.

        GTY698866Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (INNER RACE) 
    1. GTY1119043Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using SST, remove the front differential case rear tapered roller bearing (inner race) from the differential case assembly.
        • SST: 09950-40011 
          1. 09951-04010
          2. 09952-04010
          3. 09953-04030
          4. 09954-04020
          5. 09955-04011
          6. 09957-04010
          7. 09958-04011
        • SST: 09950-60011 
          1. 09951-00340
          2. 09951-00440
          3. 09952-06010
        NOTE:

        Because SST is attached to the roller portion, there is a possibility that the roller portion could break and SST could come off before the front differential case rear tapered roller bearing (inner race) comes off.

    2. GTY1113715Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. If the roller portion breaks and SST comes off, reattach SST to the inner race in the position shown in the illustration, and continue removing the parts.
        • SST: 09950-40011 
          1. 09951-04010
          2. 09952-04010
          3. 09953-04030
          4. 09954-04020
          5. 09955-04011
          6. 09957-04010
          7. 09958-04011
        • SST: 09950-60011 
          1. 09951-00340
          2. 09951-00440
          3. 09952-06010
  3. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (OUTER RACE) 
    1. GTY1111759Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using SST, remove the front differential case front tapered roller bearing (outer race) and differential drive pinion shim from the transaxle housing.
        • SST: 09308-36010 
        NOTE:

        Be careful not to damage the transaxle housing.

        HINT: 

        Align the claw of SST with the indentation of the transaxle housing when removing the parts.

        GTY733681Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (INNER RACE) 
    1. GTY1117327Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for UA81E *B for UA81F
      1. Using SST, remove the front differential case front tapered roller bearing (inner race) from the differential case assembly.
        • SST: 09950-00020 
        • SST: 09950-00030 
        • SST: 09950-60011 
          1. 09951-00440
scientia non olet · About LEMON Manuals