Typical Enabling Conditions
WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
| Atmospheric pressure | 76 kPa (abs) [11 psi (abs)] or higher |
| Estimated ambient temperature | -10°C (14°F) or higher |
| Engine coolant temperature | 75°C (167°F) or higher |
| Engine speed | Less than 4500 rpm |
| Mass air flow meter fail (P0102, P0103, P010F) | Not detected |
| Intake air temperature sensor (mass air flow meter sub-assembly) fail (P0112, P0113) | Not detected |
| Engine coolant temperature sensor fail (P0117, P0118) | Not detected |
| Vacuum sensor assembly fail (P051C, P051D) | Not detected |
| Canister pressure sensor - vacuum sensor assembly correlation fail (P109E) | Not detected |
| All of the following conditions (a), (b) and (c) are met | 4 times or more |
| (a) Single calculation term for PCV pressure integral | 0.4 seconds or more |
| (b) Intake air amount for each bank | 30 to 100 gm/sec |
| (C) Delta intake air amount for each bank | 13 gm/sec or higher |