Reassembly [10/2022 - ]: Procedure
WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL SOLENOID (SL) VALVE
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Coat the solenoid (SL) valve with Toyota Genuine ATF WS and install the solenoid (SL) valve to the transmission valve body assembly with the bolt.
Torque: 7.0 N.m (71 kgf/cm, 62 in.lbf)
- INSTALL SOLENOID (SLT) VALVE
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Coat the solenoid (SLT) valve with Toyota Genuine ATF WS and install it to the transmission valve body assembly.
- INSTALL SOLENOID (SL2) VALVE
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Coat the solenoid (SL2) valve with Toyota Genuine ATF WS and install it to the transmission valve body assembly.
- INSTALL SOLENOID (SL1) VALVE
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Coat the solenoid (SL1) valve with Toyota Genuine ATF WS and install it to the transmission valve body assembly.
- INSTALL SOLENOID (SL3) VALVE
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Coat the solenoid (SL3) valve with Toyota Genuine ATF WS and install it to the transmission valve body assembly.
- INSTALL SOLENOID (SL4) VALVE
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Coat the solenoid (SL4) valve with Toyota Genuine ATF WS and install it to the transmission valve body assembly.
- INSTALL SOLENOID (SL6) VALVE
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Coat the solenoid (SL6) valve with Toyota Genuine ATF WS and install it to the transmission valve body assembly.
- INSTALL SOLENOID (SL5) VALVE
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Coat the solenoid (SL5) valve with Toyota Genuine ATF WS and install it to the transmission valve body assembly.
- INSTALL SOLENOID (SLU) VALVE
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Coat the solenoid (SLU) valve with Toyota Genuine ATF WS and install it to the transmission valve body assembly.
- INSTALL SOLENOID LOCK PLATE
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
Torque: 7.0 N.m (71 kgf/cm, 62 in.lbf)
- INSTALL WIRE HARNESS CLAMP (w/ Stop And Start System)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
Torque: 7.0 N.m (71 kgf/cm, 62 in.lbf)
- INSTALL MANUAL VALVE
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Coat the manual valve with Toyota Genuine ATF WS and install it to the transmission valve body assembly.