LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Highlander Platinum, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Automatic Transmission System (UA81E / UA81F) - Service Information (1 Of 2)) >> Shift Lever Knob >> Installation [10/2022 - ] >> Procedure

Installation [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 
    1. Install the shift lever knob sub-assembly to the transmission floor shift assembly.
      GTY917675Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the 2 claws to connect the shifting hole cover sub-assembly as shown in the illustration.
      GTY943712Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Make sure that the shifting hole cover sub-assembly does not twist after installing the shift lever knob sub-assembly.

scientia non olet · About LEMON Manuals