LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Highlander Platinum, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Lubrication System (T24A-FTS) - Service Information) >> Oil Pump >> Installation [10/2022 - ] >> Procedure

Installation [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL OIL PUMP ASSEMBLY 
    1. GTY1078319Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 24 N.m (245 kgf/cm, 18 ft.lbf) 

  2. INSTALL ENGINE BALANCER ASSEMBLY 

    Refer to PROCEDURE - Step 6

  3. INSTALL STIFFENING CRANKCASE ASSEMBLY 

    Refer to PROCEDURE - Step 7

  4. INSTALL ENGINE OIL LEVEL SENSOR 

    See step  1

  5. INSTALL OIL STRAINER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 9

  6. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 10

  7. INSTALL TIMING CHAIN COVER ASSEMBLY 

    Refer to INSTALLATION [10/2022 - ]

scientia non olet · About LEMON Manuals