LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Corolla XLE >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension System (Rear) - Service Information (1 Of 3) >> Rear Upper Arm >> Removal [01/2019 - 09/2022] >> Procedure

Removal [01/2019 - 09/2022]: Procedure

  1. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY 

    Refer to REMOVAL [01/2019 - 06/2021] , or refer to REMOVAL [06/2021 - 09/2022]

  2. REMOVE REAR UPPER CONTROL ARM ASSEMBLY LH 
    1. Remove the bolt, nut and rear upper control arm assembly LH from the rear suspension member sub-assembly.
      NOTE:

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

      GTY898444Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE REAR UPPER CONTROL ARM ASSEMBLY RH 

    HINT: 

    Perform the same procedure as for the LH side.

scientia non olet · About LEMON Manuals