On-Vehicle Inspection [11/2022 - ]: Procedure
- WARNING LIGHT AND INDICATOR LIGHT INITIAL CHECK
- When the ignition switch is turned to ON, check that the ABS warning light, brake system warning light (red indicator), slip indicator light, VSC OFF indicator light, brake hold standby indicator light and brake hold operated indicator light come on for approximately 3 seconds.
HINT:
If the warning lights and indicator lights does not illuminate or illuminates for more than approximately 3 seconds, perform troubleshooting for the electronically controlled brake system.
- When the ignition switch is turned to ON, check that the ABS warning light, brake system warning light (red indicator), slip indicator light, VSC OFF indicator light, brake hold standby indicator light and brake hold operated indicator light come on for approximately 3 seconds.