Removal [09/2022 - 11/2022]: Procedure

Refer to REMOVAL [09/2022 - ]

1. for LH Side:

   Refer to PROCEDURE - Step 4

1. for LH Side:

   Refer to PROCEDURE - Step 9

1. for RH Side:

   Refer to PROCEDURE - Step 5

1. for RH Side:

   Refer to PROCEDURE - Step 8

1. for LH Side:
   1. w/ Cover:

      for Hatchback: Refer to PROCEDURE - Step 2

      for Sedan: See step  2

1. for RH Side:
   1. w/ Cover:

      for Hatchback: Refer to PROCEDURE - Step 3

      for Sedan: See step  3

Refer to PROCEDURE - Step 8

See step  4

Refer to PROCEDURE - Step 10

Refer to PROCEDURE - Step 12

1. Remove the nut, No. 2 camber adjust cam, rear suspension toe adjust cam sub-assembly and rear No. 2 suspension arm assembly.
   NOTE:

   Hold the rear suspension toe adjust cam sub-assembly while rotating the nut.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the nut, No. 2 camber adjust cam, rear suspension toe adjust cam sub-assembly and rear No. 2 suspension arm assembly.
   NOTE:

   Hold the rear suspension toe adjust cam sub-assembly while rotating the nut.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the 2 bolts, 2 nuts and rear No. 1 suspension arm assembly from the rear axle carrier sub-assembly and rear suspension member sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   • Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured. (except Gasoline Model AWD)
   • Loosen the bolt with the nut secured. (for Gasoline Model AWD)