LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Corolla LE >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension System (Rear) - Service Information (2 Of 3) >> REAR LOWER ARM (except HV Model AWD) >> Removal [06/2021 - 09/2022] >> Procedure

Removal [06/2021 - 09/2022]: Procedure

  1. REMOVE REAR WHEEL 

    Refer to REMOVAL [03/2019 - 09/2022]

  2. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH (w/ Height Control Sensor) 
    1. for LH Side:

      Refer to REMOVAL [06/2018 - 09/2022]

  3. REMOVE REAR FLOOR SIDE MEMBER COVER LH (w/ Cover) 
    1. for LH Side:

      for Hatchback: Refer to PROCEDURE - Step 2

      for Sedan: See step  2

  4. REMOVE REAR FLOOR SIDE MEMBER COVER RH (w/ Cover) 
    1. for RH Side:

      for Hatchback: Refer to PROCEDURE - Step 3

      for Sedan: See step  3

  5. REMOVE REAR STABILIZER LINK ASSEMBLY (for Hatchback) 

    Refer to PROCEDURE - Step 4

  6. REMOVE REAR STABILIZER LINK ASSEMBLY (for Sedan w/ Stabilizer Bar) 

    See step  4

  7. REMOVE REAR COIL SPRING 

    Refer to PROCEDURE - Step 7

  8. REMOVE REAR LOWER COIL SPRING INSULATOR 

    Refer to PROCEDURE - Step 9

  9. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY 
    1. Remove the nut, No. 2 camber adjust cam, rear suspension toe adjust cam sub-assembly and rear No. 2 suspension arm assembly.
      NOTE:

      Hold the rear suspension toe adjust cam sub-assembly while rotating the nut.

      GTY898450Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY 
    1. Remove the 2 bolts, 2 nuts and rear No. 1 suspension arm assembly from the rear axle carrier sub-assembly and rear suspension member sub-assembly.
      NOTE:

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

      GTY898454Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002