Caution / Notice / Hint

NOTE:

When replacing the tire pressure warning ECU and receiver, read the transmitter IDs and number of the transmitters (4 or 5) stored in the old ECU using the Techstream and write them down before removal.
It is necessary to perform initialization. Refer to INITIALIZATION [03/2017 - 06/2017] , or refer to INITIALIZATION [06/2017 - 08/2018] , or refer to INITIALIZATION [08/2018 - 09/2019] , or refer to INITIALIZATION [09/2019 - ] after registration. Refer to REGISTRATION [03/2017 - 06/2017] , or refer to REGISTRATION [06/2017 - 09/2019] , or refer to REGISTRATION [09/2019 - ] of the transmitter IDs into the tire pressure warning ECU and receiver after the ECU has been replaced.
Before replacing the main body ECU (multiplex network body ECU), refer to Registration.*
Refer to REGISTRATION [03/2017 - 09/2019] , or refer to REGISTRATION [09/2019 - 08/2022]