Removal [03/2017 - 10/2020]: Procedure
- REMOVE NO. 1 METER HOOD CLUSTER
Refer to PROCEDURE - Step 1 [03/2017 - 06/2017] , or refer to PROCEDURE - Step 1 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 1 [09/2019 - 03/2020] , or refer to PROCEDURE - Step 1 [03/2020 - ]
- REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
Refer to PROCEDURE - Step 2 [03/2017 - 06/2017] , or refer to PROCEDURE - Step 2 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 2 [09/2019 - 03/2020] , or refer to PROCEDURE - Step 2 [03/2020 - ]
- REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
Refer to PROCEDURE - Step 22 [03/2017 - 06/2017] , or refer to PROCEDURE - Step 22 [06/2017 - 10/2020]
- REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
Refer to PROCEDURE - Step 23 [03/2017 - 06/2017] , or refer to PROCEDURE - Step 23 [06/2017 - 10/2020]
- REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for 7 Inch Display)
Refer to PROCEDURE - Step 4
- REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 7 Inch Display)
Refer to PROCEDURE - Step 7 [03/2017 - 06/2017] , or refer to PROCEDURE - Step 8 [06/2017 - 10/2020]
- REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 8 Inch Display)
Refer to PROCEDURE - Step 8 [03/2017 - 06/2017] , or refer to PROCEDURE - Step 9 [06/2017 - 10/2020]
- REMOVE SEAT BELT WARNING LIGHT (TELLTALE LIGHT ASSEMBLY)
- Disengage the 3 claws to remove the seat belt warning light (telltale light assembly).