LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry TRD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt - Service Information (Except Hybrid) >> REAR SEAT INNER BELT ASSEMBLY (for LH Side) >> Installation [03/2017 - 06/2017] >> Procedure

Installation [03/2017 - 06/2017]: Procedure

  1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH 
    1. Install the rear seat inner with center belt assembly LH with the bolt.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      NOTE:

      Do not allow the anchor part of the rear seat inner with center belt assembly LH to overlap the protruding parts of the vehicle body.

      GTY763303Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protruding Part
    2. Engage the clamp.
    3. Connect the 2 connectors.
  2. INSTALL LUGGAGE COMPARTMENT TRIM INNER PAD 

    Refer to PROCEDURE - Step 11

  3. INSTALL REAR SEATBACK ASSEMBLY LH 

    Refer to PROCEDURE - Step 5

  4. INSTALL REAR SEATBACK ASSEMBLY RH 

    Refer to PROCEDURE - Step 6

  5. INSTALL REAR SEAT CUSHION LOCK HOOK 

    Refer to PROCEDURE - Step 7

  6. INSTALL REAR SEAT CUSHION ASSEMBLY 

    Refer to PROCEDURE - Step 8

  7. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY 

    Refer to PROCEDURE - Step 9

  8. INSTALL SPARE WHEEL COVER ASSEMBLY 

    Refer to PROCEDURE - Step 10

scientia non olet · About LEMON Manuals