LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry TRD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System (2GR-FKS) - Service Information (Except Hybrid) >> Oil Level Sensor >> Removal [08/2022 - ] >> Procedure

Removal [08/2022 - ]: Procedure

  1. INSTALL ENGINE ASSEMBLY TO ENGINE STAND 

    Refer to REMOVAL [08/2022 - 08/2023] , or refer to REMOVAL [08/2023 - ]

  2. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 28

  3. REMOVE OIL STRAINER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 29

  4. REMOVE ENGINE OIL LEVEL SENSOR 
    1. Remove the clip from the engine oil level sensor.
      GTY761248Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 nuts and engine oil level sensor from the oil pan sub-assembly.
      GTY761249Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals