Removal [03/2020 - 10/2020]: Procedure

Refer to REMOVAL [06/2017 - ]

Refer to REMOVAL [03/2020 - 10/2020]

1. Using SST, remove the rear drive shaft assembly LH from the rear differential carrier assembly.
   • SST: 09520-01011 
   • SST: 09520-20010 
     1. 09521-02010
     2. 09521-02040
     3. 09521-02060

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   • Do not damage the rear drive shaft oil seal.
   • Do not damage the inboard joint boot.
   • Do not drop the rear drive shaft assembly LH.
   • When removing the rear drive shaft assembly LH, keep it level.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Using a screwdriver, remove the rear drive shaft inboard joint shaft snap ring LH.