Removal [03/2017 - ]: Procedure

See step  1

1. Apply protective tape around the rocker panel moulding and doors as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Protective Tape

   -

   -

2. Remove the 8 clips.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

3. Remove the 6 screws.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *1

   Grommet

   -

   -

4. Remove the grommet
5. Disengage the 9 clips to remove the rocker panel moulding as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

   -

   -