Removal [03/2017 - ]: Procedure
- REMOVE REAR LIGHT ASSEMBLY LH
Refer to REMOVAL [03/2017 - 06/2017] , or refer to REMOVAL [06/2017 - ]
- REMOVE REAR LIGHT ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
- REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH
- REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
- Apply protective tape around the luggage compartment door outside garnish sub-assembly.
Protective Tape - Remove the 2 screws.
- Using a moulding remover, disengage the 4 clips and remove the luggage compartment door outside garnish sub-assembly as shown in the illustration.
Remove in this Direction - Remove the 4 clips from the luggage compartment door outside garnish sub-assembly.
- Apply protective tape around the luggage compartment door outside garnish sub-assembly.