LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry TRD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door / Hatch - Service Information (2 Of 2) (Except Hybrid) >> Fuel Lid Opener Motor Assembly >> Removal [03/2017 - ] >> Procedure

Removal [03/2017 - ]: Procedure

  1. REMOVE SPARE WHEEL COVER ASSEMBLY 

    See step  1

  2. REMOVE SPARE WHEEL COVER TRAY 

    See step  2

  3. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK 

    See step  3

  4. REMOVE REAR FLOOR FINISH PLATE 

    See step  5

  5. REMOVE LUGGAGE COMPARTMENT TRIM INNER COVER LH 

    See step  7

  6. REMOVE FUEL FILLER OPENING LID LOCK RETAINER 
    1. Turn and remove the fuel filler opening lid lock retainer as indicated by the arrows, in the order shown in the illustration.
      GTY769482Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Turn in this Direction (1)
      Remove in this Direction (2)
  7. REMOVE FUEL LID LOCK WITH MOTOR ASSEMBLY 
    1. Disengage the clamp.
      GTY759303Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the claw.
    3. Disconnect the connector to remove the fuel lid lock with motor assembly.
scientia non olet · About LEMON Manuals