LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry TRD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System - Service Information (Except Hybrid) >> Navigation Antenna >> Installation [09/2019 - ] >> Procedure

Installation [09/2019 - ]: Procedure

  1. INSTALL NAVIGATION ANTENNA BRACKET 
  2. INSTALL NAVIGATION ANTENNA ASSEMBLY 
    1. Engage the 6 guides and 2 claws to install the navigation antenna assembly as shown in the illustration.
      GTY870958Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A w/o Manual (SOS) Switch *B w/ Manual (SOS) Switch
      Install in this Direction - -
  3. INSTALL NAVIGATION ANTENNA ASSEMBLY WITH BRACKET 
    1. Install the navigation antenna assembly with bracket with the 2 screws.
    2. Engage the 2 claws.
    3. Connect the connector.
  4. INSTALL NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 17 [06/2017 - 10/2020] , or refer to PROCEDURE - Step 16 [10/2020 - 08/2021] , or refer to PROCEDURE - Step 15 [08/2021 - ]

  5. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to INSTALLATION [06/2017 - 10/2020] , or refer to INSTALLATION [10/2020 - ]

scientia non olet · About LEMON Manuals