DTC C2198-98: Initialization Switch (for Test Mode DTC) [03/2017 - 09/2019]: Description

The switch circuit inside the combination meter assembly turns on and off according to the steering pad switch assembly operation.

During test mode, the tire pressure warning light blinks at 0.125 second intervals when "Set Pressure" is selected on the multi-information display, and illuminates when the "OK" switch (steering pad switch assembly) is pressed.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	Note
C2198/98	Initialization Switch (for Test Mode DTC)	Test mode procedure is performed.	Steering pad switch assembly Spiral cable sub-assembly Wire harness or connector Tire pressure warning ECU and receiver	-