LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension System (Rear) - Service Information (Except Hybrid) >> Rear Upper Arm >> Removal [06/2017 - 03/2020] >> Procedure

Removal [06/2017 - 03/2020]: Procedure

  1. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY 

    Refer to REMOVAL [06/2017 - 10/2020] 

  2. REMOVE REAR UPPER CONTROL ARM ASSEMBLY LH 
    1. Remove the bolt, nut and rear upper control arm assembly LH from the rear suspension member sub-assembly.
      NOTE:

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

      GTY763098Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE REAR UPPER CONTROL ARM ASSEMBLY RH 

    HINT: 

    Perform the same procedure as for the LH side.

scientia non olet · About LEMON Manuals