LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension System (Rear) - Service Information (Except Hybrid) >> Rear Lower Arm >> Removal [03/2020 - 10/2020] >> Procedure

Removal [03/2020 - 10/2020]: Procedure

  1. REMOVE REAR WHEEL 

    Refer to PROCEDURE - Step 1

  2. REMOVE NO. 2 FLOOR UNDER COVER (for 2WD) 
    1. For LH Side:

      See step  2

  3. REMOVE NO. 1 FLOOR UNDER COVER (for 2WD) 
    1. For RH Side:

      See step  3

  4. REMOVE REAR STABILIZER LINK ASSEMBLY 

    For 2WD: See step  5

    For AWD: See step  3

  5. REMOVE REAR COIL SPRING 

    See step  5

  6. REMOVE REAR LOWER COIL SPRING INSULATOR 

    See step  7

  7. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY 
    1. Remove the nut, No. 2 camber adjust cam, rear suspension toe adjust cam sub-assembly and rear No. 2 suspension arm assembly.
      NOTE:

      Hold the rear suspension toe adjust cam sub-assembly while rotating the nut.

      GTY763103Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY 
    1. Remove the 2 bolts, 2 nuts and rear No. 1 suspension arm assembly from the rear axle carrier sub-assembly and rear suspension member sub-assembly.
      NOTE:

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

      GTY763035Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals