Installation [09/2019 - ]: Procedure

INSTALL REAR SEAT INNER W/CENTER BELT ASSEMBLY RH

When installing a new rear seat inner belt assembly RH:

Install the rear seat inner belt assembly RH with the bolt.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Protruding Part

NOTE:

Install the rear seat inner belt assembly RH with the arrow on the anchor part facing the front of the vehicle.
Do not allow the anchor part of the rear seat inner belt assembly RH to overlap the protruding parts of the floor panel.

Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)

Engage the clamp.
Connect the connector to install the rear seat inner belt assembly RH.
Install the rear center seat outer belt assembly.
Refer to INSTALLATION [09/2019 - ]

When reusing the rear seat inner belt assembly RH:
1. Engage the clamp.
2. Connect the connector to install the rear seat inner belt assembly RH.

INSTALL LUGGAGE COMPARTMENT TRIM INNER PAD (for Fold Down Seat Type)
Refer to PROCEDURE - Step 11
INSTALL REAR SEATBACK ASSEMBLY LH (for Fold Down Seat Type)
Refer to PROCEDURE - Step 5
INSTALL REAR SEATBACK ASSEMBLY RH (for Fold Down Seat Type)
Refer to PROCEDURE - Step 6
INSTALL REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type)
Refer to PROCEDURE - Step 7
INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)
Refer to PROCEDURE - Step 8
INSTALL REAR SEAT ASSEMBLY (for Fixed Seat Type)
Refer to INSTALLATION [06/2017 - ]
INSTALL SPARE WHEEL COVER ASSEMBLY
Refer to PROCEDURE - Step 10